Quality Woodworking Tools
Quality Woodworking Tools
 



Kreg Cutting Solutions


Woodworking Tools >  Kreg Woodworking Jigs & Tools >  Kreg Cutting Solutions


Kreg Square-Cut  (Ref: KMA2600)

Kreg Square-Cut

The Square-Cut™ allows you to quickly and accurately crosscut boards up to 12? (305mm) wide. Whether you’re using a circular saw or a jigsaw, the Square-Cut™ ensures great results. Just position the Square-Cut™ against the edge of your board and the built-in guide arm ensures that it sits perfectly square.

Description
Great Crosscuts, Every Time. Quickly and accurately crosscut boards up to 12? (305mm) wide. Adjustable guide arm requires no trimming. Switch back and forth between almost any circular or jig saw. Rubber feet hold the guide securely in place for precision and control. Low-profile design won’t interfere with saw. Built-in roof pitch scale for cutting siding






10.25 12.30


Quantity:  






Kreg Accu-Cut  (Ref: KMA2700)

Kreg Accu-Cut

Transform your circular saw into a high-performance, track-guided cutting system. Start projects right by making straight, accurate, splinter-free cuts with your circular saw and the Accu-Cut™ Circular Saw Guide Track System. It rips, crosscuts and makes angled cuts up to 1220mm long in plywood, MDF, and other large panels with super-simple setup, precise accuracy, and amazing control.

The Accu-Cut guides your circular saw along an aluminum track that keeps the saw moving in a straight line easily. The Accu-Cut™ design makes it simple to set up by just aligning the track with your cut line. No clamps are required to hold the track in place thanks to dual guide strips. They feature an anti-slip coating to prevent slipping, and an anti-chip feature to prevent splintered cuts. Plus, the track makes it easy to make straight cuts on sheets that don’t have a straight, flat edge.

Description
• Straight, accurate, splinter-free cuts made easy
• Rip, crosscut, and make angled cuts up to 1220mm long in plywood, MDF, and panels
• Simply align the guide track with your marks to make accurate cuts
• Hold track in place without clamps thanks to anti-slip guide strips
• Prevent splintering with anti-chip strips that support material during the cut
• Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation
• Mount almost any circular saw—left or right blade—to the universal sled
• Take your saw to the material instead of having to take your material to the saw




68.39 82.07


Quantity:  






Kreg Accu-Cut™ Guide Strips  (Ref: KMA2699)

Kreg Accu-Cut Guide Strips

Includes 2 Replacement Guide Strips for the Accu-Cut
Direct replacement for the factory-installed Guide Strips
Attached adhesive makes installation easy
Installation instructions included

Description
Accu-Cut Replacement Guide Strips allow you to easily replace the original strips on your Accu-Cut. If the strips ever get damaged, worn, or you switch to a different circular saw that requires a different setup, just peel off your old Guide Strips, and stick the new ones in place using the attached adhesive strip.

Includes two of the same thick, durable, anti-slip strips that came on the Accu-Cut Track originally, as well as easy-to-follow installation instructions that allow you to replace your strips in just a few minutes

6.83 8.20


Quantity:  






Kreg Rip Cut  (Ref: KMA2685-INT)

Kreg Rip Cut

The Kreg® Rip-Cut™ turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut™, you can cut with the confidence you want and the precision you need.
The Rip-Cut™ easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut™ does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you want—up to 610mm—using the built-in measuring scale, and then make your cut.

Description

• Straight, accurate, repeatable rip cuts and crosscuts made easy
• Make rip cuts and crosscuts up to 610mm wide
• Cut multiple pieces to the same size with just one setup
• Use the oversize edge guide for precise control throughout the cut
• Eliminate need for marking, measuring, and layout lines
• Take your saw to the material instead of having to take your material to the saw
• Universal sled accepts most circular saws—left or right blade
• Use left- or right-handed with reversible edge guide









34.19 41.03


Quantity:  






Kreg Crown-Pro  (Ref: KMA2800)

Kreg Crown-Pro

Take the Guesswork Out of Cutting Crown Molding

Easy-to-use for inside and outside corners
Works with crown molding up to 51/2" (138mm) wide
Eliminates the need for difficult compound-angle cuts
Included Angle Finder ensures accurate results
Base can be locked in any spring angle between 30-60°
8 non-slip rubber feet guarantee a solid foundation
Simple instructions show you how to get the right cut every time

Description
Installing crown molding is one of the best ways to add instant value to your home. The Kreg Crown-Pro™ simplifies the most frustrating steps of the process, so you make fewer mistakes and get the job done faster!

Exact Angles
This uniquely-designed tool holds your trim at the exact angle required, eliminating the need for advanced compound miter cuts and difficult “coping.”

Versatile & Compatible
Its curved design lets you compensate for a wide variety of crown molding spring angles, and its extension arms lets you work with crown up to 51/2" (140mm) wide.

Easy Angle Finder
The Crown-Pro™ comes with an adjustable Angle Finder that easily shows you the exact angle of inside and outside corners. Plus, you can use the Angle Finder to check the spring angle of your crown molding.

10" (254mm) saws will work with crown up to 31/2" (89mm) wide, depending on manufacturer.
12" (305mm) saws will work with crown up to 51/2" (140mm) wide, depending on manufacturer.






23.93 28.72


Quantity:  






Kreg Precision Miter Gauge  (Ref: KMS7101)

Kreg Precision Miter Gauge

Why spend your time calibrating a miter gauge when you can get factory-calibrated accuracy right out of the box? Our Precision Miter Gauge requires no calibrating, and features positive stops at 0°, 10°, 221/2°, 30° and 45°, making it easy to cut miters quickly

Adjustable Cutting Accuracy with Simplicity and Durability. Factory-calibrated for perfect cuts right out of the box. Positive stops at 0°, 10°, 221/2°, 30° and 45°. 24? (610mm) bar with 5 bar adjusters eliminates the play between the bar and the miter slot. Brass pin allows quick changes between positive stop angles. Fits standard 3/8? (9.5mm) x 3/4? (19mm) miter slots







88.91 106.69


Quantity:  






Kreg Precision Miter Gauge System  (Ref: KMS7102)

Kreg Precision Miter Gauge System

Our Precision Miter Gauge System requires no calibrating, and features positive stops at 0°, 10°, 22½°, 30° and 45° to make it easy to cut accurate miters quickly. When you do want to cut a more complicated angle, the easy-to-use Vernier scale allows for fast adjustments to 1/10th of a degree. Plus, the Precision Miter Gauge System offers a long, anodized-aluminum fence and stop system that let you easily make accurate, repeatable cuts.

Description
• One Miter Gauge with everything you need for accuracy
• Factory-calibrated; perfect right out of the box
• Positive stops at 0°, 10°, 221/2°, 30°, and 45° (degrees)
• Brass pin allows quick changes between positive stop angles
• 610mm bar with 5 bar adjusters eliminates “play” between the bar and miter slot
• 610mm fence with swing stop and self-adhesive measuring tape




123.11 147.73


Quantity:  






Kreg Precision Band Saw Fence  (Ref: KMS7200)

Kreg Precision Band Saw Fence

Most band saw blades don’t run perfectly perpendicular to the front of your table. There’s always just a little bit of “drift” that prevents you from getting precise cuts even when you are using a fence. The Kreg® Precision Band Saw Fence easily adjusts to your blade’s drift angle to provide you with a new level of band saw accuracy. This fence mounts to most 14? (356mm) band saws right out of the box and can be modified to fit many others by drilling a single hole in the aluminum mounting rail.

Description
A New Level of Band Saw Accuracy. Adjusts to blade drift angle. Fits most 14? (356mm) band saws. Can be modified to fit most any band saw. Allows for blade drift and perpendicularity. Can be changed to low-profile position. Fence accepts re-saw guides or Kreg® Stops. Precision Lens Cursor for exact measurements




95.75 114.90


Quantity:  






Kreg Micro Adjuster  (Ref: KMS7215)

Kreg  Micro Adjuster

Provides precise adjustments, down to .005" (0.127mm)
Easy to adjust with the simple turn of a thumb wheel
For use with Kreg Precision Band Saw Fence

Description
Dial-in precise adjustments to your Kreg Precision Band Saw Fence – down to .005" (0.127mm) – with the simple turn of a thumb wheel.

17.09 20.51


Quantity:  






Kreg 4½" Resaw Guide  (Ref: KMS7123)

Kreg 4

Durable anodized-aluminum
Actively compensates for blade drift
Attaches to Kreg® Precision Band Saw Fence
Curved guide face helps steer board into cut
For small- and medium-sized workpieces

Description
This Resaw Guide easily attaches to the Kreg® Precision Band Saw Fence, allowing for a higher level of control and accuracy when adjusting for band-saw blade drift. The curved face of the guide helps you steer the board into the cut and get the perfect results you're looking for.

15.03 18.04


Quantity:  






Kreg 7" Resaw Guide  (Ref: KMS7214)

Kreg 7

Durable anodized-aluminum
Actively compensates for blade drift
Attaches to Kreg Band Saw Fence
Curved guide face steers board into cut
For use with large workpieces

Description
The Kreg Resaw Guide easily attaches to the Kreg Precision Band Saw Fence, allowing for a higher level of control and accuracy when adjusting for band-saw blade drift. The curved face of the guide helps you steer the board into the cut and get the perfect results you're looking for.

17.09 20.51


Quantity:  






Kreg Precision Trak & Stop System  (Ref: KMS8000)

 Kreg Precision Trak & Stop System

Take the guesswork—and your tape measure and pencil—out of cutting wood to length. Our Precision Trak and Stop Kit allows you to turn a miter saw into a precise cutting system. Simply position the stop at the dimensions you’d like to cut using the precision lens cursor, place the board against the stop, and cut to that exact length every time. You build the support wings out of plywood (or another sheet material), and then add the Trak. Outfitting your saw to cut perfectly-sized workpieces couldn’t be simpler!

Description
• Take the guesswork out of cutting wood to length
• Turn your miter saw into a precise cutting system
• Adjustable stops position your workpiece for repeatable, reliable results
• Precision lens cursor for fast, accurate positioning
• Production stop and swing stop provide great results
• L-shaped base design makes alignment and mounting easy
• Includes 2438mm of Trak in 610mm long sections that can be used on the right or left side of the saw, or split between both sides
• 2 self-adhesive measuring tapes correctly measure cut lengths on both sides of the blade






109.43 131.32


Quantity:  






Kreg Precision Trak & Stop System METRIC  (Ref: KMS8000M)

 Kreg Precision Trak & Stop System METRIC

Take the guesswork—and your tape measure and pencil—out of cutting wood to length. Our Precision Trak and Stop Kit allows you to turn a miter saw into a precise cutting system. Simply position the stop at the dimensions you’d like to cut using the precision lens cursor, place the board against the stop, and cut to that exact length every time. You build the support wings out of plywood (or another sheet material), and then add the Trak. Outfitting your saw to cut perfectly-sized workpieces couldn’t be simpler!

Description
• Take the guesswork out of cutting wood to length
• Turn your miter saw into a precise cutting system
• Adjustable stops position your workpiece for repeatable, reliable results
• Precision lens cursor for fast, accurate positioning
• Production stop and swing stop provide great results
• L-shaped base design makes alignment and mounting easy
• Includes 2438mm of Trak in 610mm long sections that can be used on the right or left side of the saw, or split between both sides
• 2 self-adhesive measuring tapes correctly measure cut lengths on both sides of the blade






109.43 131.32


Quantity:  






Kreg Heavy-Duty Trak - 48"  (Ref: KMS7704)

Kreg Heavy-Duty Trak - 48

'L'-shaped, anodized-aluminum extrusion
Great for heavy-use commercial applications
(4) slots that accept standard 1/4" (6mm) hex bolts
Compatible with the Kreg 1/2" (13mm) measuring tap

Our Heavy-Duty Trak is an 'L'-shaped, anodized-aluminum extrusion that is extremely straight and great for heavy-use commercial applications. This Trak contains four T-slots that accommodate the head of a standard 1/4" (6mm) hex bolt. A 1/2" (13mm) recessed indentation runs along the top and front side of the Trak for easy application of a self-adhesive measuring tape (sold separately).

47.87 57.44


Quantity:  






Kreg Top Trak - 24"  (Ref: KMS7712)

Kreg Top Trak - 24

Self-aligning, 'L'-shaped mounting foot
Can be easily installed on shop-made fence
Also available in 48" (609mm) length

Description

This Trak features a self-aligning, 'L'-shaped mounting foot for easy installation on a shop-made fence. Just drill 1/8" (3mm) holes through the back of the extrusion and secure with the included mounting screws.

27.35 32.82


Quantity:  






Kreg Top Trak - 48"  (Ref: KMS7714)

Kreg Top Trak - 48

Self-aligning, 'L'-shaped mounting foot
Can be easily installed on shop-made fence
Also available in 24"

Description

This Trak features a self-aligning, 'L'-shaped mounting foot for easy installation on a shop-made fence. Just drill 1/8" (3mm) holes through the back of the extrusion and secure with the included mounting screws. Also available in 24" (609mm) length.

17.09 20.51


Quantity:  






Kreg Mini Trak - 48" (4')  (Ref: KMS7509)

Kreg Mini Trak - 48

Can be used to produce woodshop jigs and fixtures
Great for creating taper jigs and cut-off sleds
Features a T-slot to capture the head of a standard 1/4" (6mm) hex bolt
Compatible with Kreg Track Clamps

Description
The Mini Trak can be used to produce countless types of woodshop jigs and fixtures, such as taper jigs and cut-off sleds. An adaptation of our other popular styles of Trak, Mini Trak features a T-slot that captures the head of a standard 1/4" (6mm) hex bolt. The Mini Trak you have selected is 48" (1219mm) long.

Compatible with Kreg Track Clamps. Not for use with Kreg Bench Clamps.

27.35 32.82


Quantity:  






Kreg Track Clamps  (Ref: KMS7520)

Kreg Track Clamps

Attach easily to Accu-Cut track and Starting Block when clamping is needed
Durable molded construction
Includes two clamps and mounting hardware
Compatible with Kreg Clamp Trak, Universal Clamp Trak Kits, and Mini Trak
Handy for creating shop-made jigs and fixtures
2 Track Clamps Included
Conveniently packaged in Kreg Hardware Container - Small

Description
Track Clamps make perfect companions to the Accu-Cut Circular Saw Guide Track System. These easy-to-use clamps lock into place on the underside of the Accu-Cut track and Starting Block to offer additional holding power when needed—such as when working with slick-surfaced sheet goods such as melamine-coated particleboard, or when cutting with a single length of track.

Track Clamps are also compatible with other Kreg products such as Clamp Trak, Universal Clamp Trak Kits, and Mini Trak. In addition, Track Clamps are handy for creating shop-built jigs and fixtures.




20.51 24.61


Quantity:  






Kreg Solid Production Stop  (Ref: KMS7800)

Kreg Solid Production Stop

Dual lens cursors for use on either side of saw blade
Designed to withstand use in a rugged shop environment
Compatible with Kreg® Top Trak and Heavy-Duty Trak
Removable and repositionable

17.09 20.51


Quantity:  






Kreg Swing Stop  (Ref: KMS7801)

Kreg Swing Stop

Add repeatable accuracy to your miter saw, band saw, table saw fence, router table, and more with this versatile Swing Stop.

Curved face allows stop to be easily bypassed
Durable bushings ensure rigidity and accuracy
Precision lens cursor provides exact measurements
Compatible with Kreg® Top Trak and Heavy-Duty Trak


23.93 28.72


Quantity:  






Kreg Jig & Fixture Bar - 30"  (Ref: KMS7303)

Kreg Jig & Fixture Bar - 30

Perfect for building workshop jigs and fixtures
The same bar used on our Kreg® Precision Miter Gauge
Screws along the bar adjust easily to compensate for any "play" in the miter gauge slot
Mounting holes every 4" (101mm) along bar length
Fits standard 3/8" (9mm) x 3/4" (19mm) miter gauge slots

Description
Miter-Gauge Bar with a Precise Fit
If you're building jigs and fixtures for your table saw, router table, band saw, or other tools with a miter slot, you need a miter-gauge bar that fits precisely (in a standard 3/8" (9mm) x 3/4" (19mm) miter slot) and slides smoothly. The Jig and Fixture Bar does both.

Proven Performance
This is the same adjustable bar that comes standard on our Precision Miter Gauge, giving you the same proven accuracy on fixtures you build.

Built-In Adjustablility
Six nylon screws along the length of the bar adjust with the simple turn of a screwdriver to take up any play in the miter gauge slot. That lets you get an exact fit and retain it over years of use.

Great Versatility
This 30" (762mm) long bar has mounting holes every 4" (102mm) along its length that allow you options for mounting your fixtures.

23.42 28.10


Quantity:  






Woodworking Tools >  Kreg Woodworking Jigs & Tools >  Kreg Cutting Solutions



Kreg Cutting Solutions
Buy online at www.quality-woodworking-tools.com with FREE mainland UK delivery for all woodworking tools





Woodworking Tools Homepage
checkout
  View Basket
Woodworking Tools UK Delivery
Free UK Delivery
Arbortech Ball Gouge SPECIAL OFFER WHEEL MARKING GAUGE Digital Depth Gauge for Routers etc Soba Wood Worker Set- £10 off - Last Few at This Price !!! Andy King Striking Knives Signature Range SCT Woodworking Chucks , Centres , Faceplates Countersinks etc Elipse Respirators Range Bench Dog Woodworking Accessories Kreg Woodworking Jigs & Tools Kunz Quality German Woodworking Tools Pinie Quality Woodworking & Carpentry Tools Dalmann Mallets Range Premium Bandsaw Blades Sjobergs Swedish Work Benches Winbag Air Wedge Tool Mirka Abrasives Tormek Sharpening Tools Veritas Woodwork Hand Tools Soba Precision Woodworking Planes & Tools Arbortech Power Carving Rotarex Carving & Shaping Discs Sandipads Hook & Loop Sanding System Triton Woodworking Machines Axminister Edgebander Brimarc Braces Bencil Carpenters Pencils Co-Matic Power Feeds Duragrit Rotary Tools & Burrs Johnson Tools Rasps & Rifflers Johnson Sharpening Suppplies Eze-lap Diamond Sharpening Hones & Stones Dust Extraction Accessories Flexcut 5 Piece Printmaking Set Flexcut Carving Tools Beber Carving Tools Range Proxxon Woodworking Tools GemRed Digital Angle Measuring Shogun High Quality Japanese Saws Ice Bear Japanese Tools Naniwa Waterstones Asahi Japanese Woodworking Tools Pyrography Jet Woodworking Machinery Microplane Razor Sharp Rasps Miller Dowel Joinery Kits Nobex Carpentry Tools Woodworking Glues & Adhesives Wooden Toolchests & Storage Boxes Woodcraft Jigs , Screws & Tools UJK SOLID BEECH BISCUITS Pegas Scroll & Coping Saw Blades Zona Razor Saws Pen Kits & Accessories Spraycraft Airbrush Equipment Axminster Pen & Pencil Kits Clarke Woodworking Tools & Machinery Draper Woodworking Tools & Machinery

Newsletter Subscription