TITEBOND MELAMINE GLUE – 3.8 LITRE (1 US GALL) 106545-SORRY OUT OF STOCK

Titebond Melamine Glue is designed for bonding wood, particleboard, MDF and other porous substrates to synthetic materials such as melamine, vinyl and HPL as well as metals. It offers a fast initial tack, yet has a longer open time that allows for the accurate alignment of working materials. Titebond Melamine Glue is a water-based adhesive that is nonflammable, has low odor, dries clear and cleans up with water. Its thicker formulation offers fewer runs and drips, making it easier to use and more effective for precise assemblies

Features & Benefits

Bonds melamine, vinyl coated products, and HPL to porous materials
Thicker formulation – fewer runs and drips
Fast setting – Excellent strength
Dries clear
Long open time
Fast initial tack

Specifications

CONFORMS TO ASTM D-4236
Application Guidelines

Application Temperature: Above 40°F (4°C)
Open Assembly Time: 5 minutes (70 °F./50%RH)
Total Assembly Time: 10-15 minutes (70°F./50%RH)
Minimum Required Spread : Approximately 6 mils or 250 square feet per gallon
Required Clamping Pressure: Enough to bring joints tightly together (generally, 30-80 psi for HPL,100-150 psi for softwoods,125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application: Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.

Physical Properties

Type: Specialized vinyl acetate emulsion
Calculated VOC: 77 g/L
State: Liquid
Weight Per Gallon: 8.6 lbs .
Color: White
Dried Film: Clear
Flashpoint: > 200°F
Solids: 57%
Freeze / Thaw Stability: Unstable
Viscosity: 12,000 cps
pH : 4.0
Chalk Temperature: To assure a good bond, 40°F is the lowest recommended temperature of the glue, air and materials during application.
Storage Life: 24 months in tightly closed containers at 75°F
Limitations

Titebond Melamine Glue is not intended for exterior use or where moisture is likely. Not for structural or load bearing applications. Vacuum pressing should only be used for veneers up to 1/16 inch in thickness. Do not use when temperature, glue or materials are below 40°F. If product has been frozen (gel-like appearance), it cannot be used. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF REACH OF CHILDREN.

Caution Statement

CAUTION: EYE AND SKIN IRRITANT. Contains oxydipropyl dibenzoate and dipropylene glycol n-butyl ether. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.